Single Cylinder Rotary Sand Dryer




BH single-cylinder dryer system is a new type of dedicated drying equipment consisting of a heat source,a disperser,a belt feeder,a feeder, a rotary drum,a belt feeder,an induced draft fan,an unloader,and a power distribution cabinet.Compared with the three cylinder rotary dryer, its thermal efficiency is not as high as that of the three cylinder rotary dryer,but it has widely application scope and large capacity.




Description
BH single-cylinder dryer system is a new type of dedicated drying equipment consisting of a heat source,a disperser,a belt feeder,a feeder, a rotary drum,a belt feeder,an induced draft fan,an unloader,and a power distribution cabinet.Compared with the three cylinder rotary dryer, its thermal efficiency is not as high as that of the three cylinder rotary dryer,but it has widely application scope and large capacity.
BH single-cylinder rotary dryer is widely used. , It is not only suitable for the drying of raw materials with higher water content such as clay, coal, slag, Sands, limestone, stones, mineral filter cake, filter cakes, fly ash, gypsum and iron powder in the cement industry, but also suitable for raw materials for calcium carbide slag, phosphogypsum, sugar industry, paper industry and chemical industries. Drying of waste. Sewage Sludge, Fermented Soybean Meal, Bean Residue, Dregs, Organic Fertilizer, Chicken Manure, Poultry Feces, Cattle Dung, Pig Manure, Horse Feces, Cow Dung, Animal Waste, Compost, organic fertilizers, compound fertilizers, Biomass material, Sawdust, etc.
Features


Working principle
BH single rotary dryer adopts direct flow type of heating with heat soure from firing unit. The material to be dried is pushed back immindiately by spiral board when enters the shell from feeding tank and feeding chute. Because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.
SIZE(m) (Dia.*L) |
Volume (m³) |
Capacity (t/h) |
Input moisture (%) |
Output moisture (%) |
Obliquity (%) |
Highest inlet air temperature (℃) |
Power (kw) |
Total weight (t) |
Φ1.2×8.0 | 9 | 1.9~2.4 | 40±5 | ≤1 | 3~5 | 700~800 | 7.5 | 9 |
Φ1.2×10 | 11.3 | 2.4~3.0 | 40±5 | ≤1 | 3~5 | 700~800 | 7.5 | 11 |
Φ1.5×12 | 21.2 | 4.5~5.7 | 40±5 | ≤1 | 3~5 | 700~800 | 15 | 18.5 |
Φ1.5×14 | 24.7 | 5.3~6.6 | 40±5 | ≤1 | 3~5 | 700~800 | 15 | 19.7 |
Φ1.5×15 | 26.5 | 5.7~7.1 | 40±5 | ≤1 | 3~5 | 700~800 | 15 | 20.5 |
Φ1.8×12 | 30.5 | 6.5~8.1 | 40±5 | ≤1 | 3~5 | 700~800 | 18.5 | 21.5 |
Φ1.8×14 | 35.6 | 7.6~9.5 | 40±5 | ≤1 | 3~5 | 700~800 | 18.5 | 23 |
Φ2.2×12 | 45.6 | 9.7~12.2 | 40±5 | ≤1 | 3~5 | 700~800 | 22 | 33.5 |
Φ2.2×14 | 53.2 | 11.4~14.2 | 40±5 | ≤1 | 3~5 | 700~800 | 22 | 36 |
Φ2.2×16 | 60.8 | 13.0~16.2 | 40±5 | ≤1 | 3~5 | 700~800 | 22 | 38 |
Φ2.4×14 | 63.3 | 13.5~16.9 | 40±5 | ≤1 | 3~5 | 700~800 | 37 | 45 |
Φ2.4×18 | 81.4 | 17.4~21.7 | 40±5 | ≤1 | 3~5 | 700~800 | 37 | 49 |
Φ2.4×20 | 90.4 | 19.3~24.1 | 40±5 | ≤1 | 3~5 | 700~800 | 45 | 54 |
Φ2.4×22 | 99.5 | 21.2~26.5 | 40±5 | ≤1 | 3~5 | 700~800 | 45 | 58 |
Φ2.6×24 | 127.4 | 27.4~34.0 | 40±5 | ≤1 | 3~5 | 700~800 | 55 | 73 |
Φ3.0×20 | 141.3 | 30.1~37.7 | 40±5 | ≤1 | 3~5 | 700~800 | 75 | 85 |
Φ3.0×25 | 176.6 | 37.7~47.1 | 40±5 | ≤1 | 3~5 | 700~800 | 75 | 95 |
Φ3.2×25 | 201 | 42.9~53.6 | 40±5 | ≤1 | 3~5 | 700~800 | 90 | 110 |
Φ3.6×28 | 285 | 60.8~76.0 | 40±5 | ≤1 | 3~5 | 700~800 | 160 | 135 |
≤1 |
Packing