Pulse dust collector

BH Pulse dust collector is a new high-efficiency pulse dust collector improved on the basis of bag filter. It combines the advantages of sub-chamber back-blowing various pulse jet dust collectors, and overcomes the shortcomings of insufficient chamber dust-removing strength and uneven distribution of inlet and outlet winds. Expanded the scope of application.

Mobile : +8618336096729

bhmtec@dry-mortar-plant.com Chat Now

Features Parameter Packing and delivery Related Products Inquiry

Features

Introduction:

Working principle:

The pulse dust collector refers to removing the dust attached to the filter medium (bag or filter cartridge) by blowing compressed air; during operation, the dust-containing gas enters the ash hopper from the inlet duct, and the coarse dust particles directly fall into the bottom of the ash bucket. The fine dust particles enter the middle and lower tanks with the airflow turning upwards, and the dust accumulates on the outer surface of the filter bag. The filtered gas enters the upper tank to the clean air collecting pipe-exhaust air passage, and is discharged to the atmosphere through the exhaust fan, collecting The dust is automatically dropped into the respective silos or channels through the gravity valve gap type. The cleaning process is to cut off the clean air outlet duct of the chamber, so that the bag of the chamber is in a state of no airflow (the compartment is shut off and the air is cleaned). If there is no dust or a certain degree, the mechanical cleaning work will stop working.

Advantage:

(1) High reliability design to ensure long-term stable operation of the bag dust collector with the host equipment, and the maintenance workload is small;

(2) Optimizing the design of the inlet and outlet ducts, which is conducive to uniform airflow distribution;

(3) Anti-leakage design to ensure that the air leakage rate of the bag dust collector is reduced;

(4) All-steel split structure design, easy to transport and install equipment;

(5) Low operating costs. Optimizing the process parameter design is beneficial to the low-resistance, high-efficiency and stable operation of the bag filter, reducing the system energy consumption and effectively reducing the loss of the filter bag.

Application:

Pulse dust collector is widely used in the purification of dusty gas and material recovery in metallurgy, building materials, cement, machinery, chemical, electric power and light industry. For example: dry mortar production site, industrial rotary dryer working site, sand maker working site, Grinding mill working site and so on.

Parameter

型号	处理风量(m³/min)	过滤风速(m/min)	总过滤面积(m²)	净过滤面积（m²）	收尘室室数(a)	滤袋总个数(a)
ppcs96-4	26800	1.2-2.0	375	279	4	384
ppcs96-5	33400		456	372	5	480
ppcs96-6	40100		557	465	6	576
ppcs96-7	46800		650	557	7	672
ppcs96-8	53510		774	650	8	768
ppcs96-9	60100		838	774	9	864
ppcs96-2×5	66900		929	936	10	960
ppcs96-2×6	80700		1121	1028	12	1150
ppcs96-2×7	94100		1308	1215	14	1344
ppcs96-2×8	107600		1494	1401	16	1536
ppcs96-2×9	121000		1681	1588	18	1728
ppcs96-2×10	134500		1868	1775	20	1920

Packing and delivery

Delivery time: 20-30 days after deposit arrived.
Payment term: 30% by T/T as deposit, balanced 70% by T/T before delivery.

Package:
1) Wire cables are used for fastening the machine on the trailer or inside the container.
2) Cork wood are placed in front or behind the machine to protect it.
3) Plastic film is covered on the machine as a rain-roof.
4) Crane and fork are used during the whole loading.

Products

Pulse dust collector

30-120TPH Dry Mortar Production line

Three Cylinder Rotary Sand Dryer

Sand Making Plant

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.